ONE Idler tire for cassette deck, choose the right one

Description

ONE Idler tire, new, unused.
Choose one or more idler tires from the following dimensions and send me a short note before you place an order
All dimensions are in milimeters, ID x OD x Height
10.7x15.6x2
3.7x8.0x2.7
4.5x8.5x3
7x11.9x2.2
9.3x14.8x2.05
9.7x13.7x1.5
9.7x13.8x2.45
7.8x13.8x2.5
10.8x16.4x2.5
11.8x16x2.0
11.8x19x2.0
12.8x18x2.5
17.9x23.7x2.2
18.9x24.3x3.0
3x8x2
5x11x3
4.5x15.7x3
14x22x2
9.5x16.5x2.5
13x23.7x3
17x23x2
5x15x3
4x9x2
13.7x18.5x2.1
About Shipping:
Economy shipping (cheap) -
shipped as standard letter, without tracking number. Items are delivered directly to your mailbox, there is no need to go to post office. Delivery time: typically 2 days to 2 weeks, during peak days and holidays it can take longer
Standard shipping (cheap and secure) -
sent as registered letter, with tracking number. Usually, signature is required to pick it up. You can track your item via your post web site. Delivery time: typically 2 days to 2 weeks, during peak days and holidays it can take longer.
Expedited shipping (fast, secure but expensive) - EMS.
Delivery time up to 4 business days.
Handling time:
for orders received before 5 PM, items are shipped next business day
If the item(s) are not delivered in 30 days, let me know and I will send you new one(s).
Good luck
FAQ section
Q: After I replace the belt, what else should I do?
A: You should at least set correct tape speed. Please go to http://www.ebay.com/itm/Speed-calibration-test-tape-for-cassette-deck-or-walkman-3000-Hz-/132264659421 for more details. For perfect results, you should also do cleanup, lubrications and other tasks.
Q: Walkman runs too slow or too fast, even after I replaced the belt.
A: This is not belt issue. This is old device and speed has to be re-adjusted. Please, see the previous answer
Q: I can hear lot of wow/flutter
A: There can be many reasons for it.  Most often it is worn pinch roller, dirt in the belt path, dirty or dry moving parts of walkman, polished capstan, dry capstan bearings, wrong belt size or quality, etc.
Q: Do you also fix walkmans?
A: Yes, I’ve fixed many of them.  Usually for my friends and for me. I have about 400 of them. Sometimes I also fix walkmans  for eBay members but I'm very busy.
Q: I need advice regarding fixing walkmans
A: I am very glad to help. Unfortunately, I get so many question, that I'm not able to answer them all. Pl
ease visit tapeheads.net or stereo2go.com sites and ask experienced members, there. Answers are then available for everyone. I also contribute there.
Q: Do you also sell walkmans?
A: Not now, may be one day...
Q: What is the correct belt path routing?
A: Google search your walkman model and display result as images. Usually you will find photo of mechanics. If not, make your photo and send it to the forums mentioned above. I will try to help.
Q: My model is not listed, do you have belt, pinch roller or idler for it?
A: If it is not listed, it means that I do not have information about the size. In  case of the belt, please measure the belt length. Stretch a piece of string along the belt path and measure the belt circumference. Send the measures to me. From this I can measure the original belt size. In case of pinch roller, send me the outer diameter, rubber height, hub height and hole diameter.
Q: What belts do you sell?
A: I sell only hard-to-get belts used in later walkman models. Thicker belts used in early models should be available elsewhere.
Q: After I hit play button, I can hear only slight motor noise and then it stops. Is it belt issue, or is it something else?
A: Yes, it is very probably the belt issue.
Q: How long do belts usually last?
A: Usually about 20 years. It depends on the amount of additives added during vulcanization process. I tried to avoid using too much additives for increasing the material elasticity, so I hope the belt will last longer. But who knows..