Craftsman USA empty tool case from 220 pc set for 1/4. 3/8 1/2 sockets, ratchets

Description

Here is a Craftsman empty blow mold plastic tool case, from a 220 piece mechanics tool set. For 1/4, 3/8 and 1/2 sockets, ratchets and misc tools. The tools that came in the case were made in USA so assume the tool case was as well. Measures app 18" wide x 15" deep x 6" high. This has marked cutouts. Also has a large storage area when the top lid is open. There is a built in carry handle on top. There are 2 closing clasps for the case. There is a locking flap on the top inside lid of case. Will list all the marked cutouts. Some cutouts are over lapping, since there were 6pt and 12pt sockets in the same drive size.
1/4 mm shallow, 4 to 14 + 5.5
1/4 sae shallow, 3/16 to 9/16
1/4 sae shallow, 5/32 to 9/16
1/4 mm deep, 4 to 14
1/4 sae deep, 3/16 to 9/16
1/4 sae deep, 3/16 to 1/2
3/8 mm shallow, 6 to 19
3/8 mm shallow, 6 to 19
3/8 sae shallow, 1/4 to 13/16
3/8 sae shallow, 1/4 to 3/4
3/8 mm deep, 9, 10, 12, 13
3/8 sae deep, 3/8 to 9/16
1/2 mm shallow, 9 to 13
1/2 sae shallow, 3/8 to 5/8
Other marked cutouts are for the 1/4, 3/8 and 1/2 ratchet wrenches
1/4 x 1-1/2" extension
magnetic spin handle
9 spots for screwdriver bits for handle, not marked
12 cutouts for mm and sae nutdriver bits
6 for combo wrenches, 3/8 to 1/2 and 11, 12, 13
Please note that there are not too many cutouts for 3/8 drive deep sockets or 1/2 drive shallow sockets. There are no cutouts for 1/2 deep sockets
This is new old stock. No vendor packaging and no tools. Unsure of part # of tool case. Unsure if covered by the Craftsman warranty. A few scuffs from storage. A little dusty. This weighs app 5-1/2 pounds, packed up will weigh 8pounds but the shipping box will be app 20" x 18" x 9" so dimensional weight will apply. You can use the shipping calculator for UPS Ground
. If you have any questions, let me know please. Thanks.