Belden 9L26016 008H100 Flat Cables 26AWG 16C STR Ribbon 30m/100ft Gray PVC

Description

Belden 9L26016 008H100 Flat Cables 26AWG 16C STR Ribbon 30m/100ft Gray PVC
Manufacturer Belden Inc. Series 9L260XX Part Status Active Cable Type Flat Cable Number of Conductors 16 Pitch 0.050" (1.27mm) Length 100.0' (30.48m) Wire Gauge 26 AWG Conductor Strand 7 Strands / 34 AWG Shielding Unshielded Jacket Color Gray Ribbon Thickness 0.039" (0.99mm) Ribbon Width 0.800" (20.32mm) Jacket (Insulation) Material Poly-Vinyl Chloride (PVC) Voltage 300V Operating Temperature -40°C ~ 105°C Ratings UL Style 2651 Features - Conductor Material Copper, Tinned Insulation Resistance 10 GOhm First Conductor Mark Blue Current Rating 1.5A All flat cable types on this page are 28 AWG (7 — 36) stranded and feature 0.050" conductor spacing. PVC insulated, except where noted, and rated 300 V, 105°C. Voltage Rating: 300 Vrms. Dielectric Withstanding Voltage: 2000 Vrms. All will terminate to any standard IDC flat cable connector. See Product Index for complete selection. Passes VW-1 vertical wire flame test. UL recognized. Product Description Belden's (9L260XX series) 0.050" pitch extruded gray ribbon cable was designed for general purpose electronic interconnect applications where higher current carrying capacities are required. The design also conforms to the electrical performance specifications outlined by the SCSI-3 parallel interface document. As with the 9L280XX series, the cable provides reliable mass-termination to standard 0.100"contact IDC connectors, flexibility, consistent electricals and breakouts can be made easily with the tear feature design. In addition, the overall cable thickness is only 0.038" ± 0.002" allowing mateability with all standard IDC connectors. The cable is constructed of stranded 26 AWG (7 — 34) tinned copper conductors. Insulation material consists of Gray PVC, with a Blue polarity stripe for proper circuit alignment. Various conductor counts are standard; other sizes are available upon request. The cable is UL approved and CSA certified, and passes the VW-1 Vertical Wire Flame Test.
Top Biz Buy's
Belden 9L26016 008H100 Flat Cables 26AWG 16C STR Ribbon 30m/100ft Gray PVC
Manufacturer
Belden Inc.
Series
9L260XX
Part Status
Active
Cable Type
Flat Cable
Number of Conductors
16
Pitch
0.050" (1.27mm)
Length
100.0' (30.48m)
Wire Gauge
26 AWG
Conductor Strand
7 Strands / 34 AWG
Shielding
Unshielded
Jacket Color
Gray
Ribbon Thickness
0.039" (0.99mm)
Ribbon Width
0.800" (20.32mm)
Jacket (Insulation) Material
Poly-Vinyl Chloride (PVC)
Voltage
300V
Operating Temperature
-40°C ~ 105°C
Ratings
UL Style 2651
Features
-
Conductor Material
Copper, Tinned
Insulation Resistance
10 GOhm
First Conductor Mark
Blue
Current Rating
1.5A
All flat cable types on this page are 28 AWG (7 — 36) stranded and feature 0.050" conductor spacing. PVC insulated, except where noted, and rated 300 V, 105°C.
Voltage Rating:
300 Vrms.
Dielectric Withstanding Voltage:
2000 Vrms. All will terminate to any standard IDC flat cable connector. See Product Index for complete selection. Passes VW-1 vertical wire flame test. UL recognized.
Product Description
Belden's (9L260XX series) 0.050" pitch extruded gray ribbon cable was designed for general purpose electronic interconnect applications where higher current carrying capacities are required. The design also conforms to the electrical performance specifications outlined by the SCSI-3 parallel interface document. As with the 9L280XX series, the cable provides reliable mass-termination to standard 0.100"contact IDC connectors, flexibility, consistent electricals and breakouts can be made easily with the tear feature design. In addition, the overall cable thickness is only 0.038" ± 0.002" allowing mateability with all standard IDC connectors. The cable is constructed of stranded 26 AWG (7 — 34) tinned copper conductors. Insulation material consists of Gray PVC, with a Blue polarity stripe for proper circuit alignment. Various conductor counts are standard; other sizes are available upon request. The cable is UL approved and CSA certified, and passes the VW-1 Vertical Wire Flame Test.
×
We are not an Authorized Dealer, Authorized Distributor, nor Authorized Representative for any manufacturer and therefore
TopBizBuys, LLC offers no warranties, expressed or implied for any of the products that we sell.
By purchasing this item, buyer agrees that TopBizBuys, LLC is not responsible for any damages or injuries caused by the misuse, improper installation, or failure of the product.
Buy now and save!
Tell a friend
Visit store
Watch now
Postage info
Click the Postage tab above the listing description for more info
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Additional Information
No additional information at this time
Ask seller a question
You might also like
ITW 1/4" InLine Fuel Gas Rotary Shut-Off Valve for Briggs & Stratton
ITW 1/4" InLine Fuel Gas Rotary Shut-Off Valve for Briggs & Stratton *Pack of 5*
5/8" 304 Stainless Steel Hex Nylon Insert Lock Nut 5/8-11 *Pack of 400*
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© TopBizBuys
Postage
Click the Postage tab above the listing description for more info
Payment
Accepted Payment Methods
PayPal
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Seller will pay for return shipping.
Additional Information:
Returns Accepted within 30 days. Must be returned in original condition and unuséd/uninstalled. Buyer may ask for full refund or replacement (if available).
eBay integration
by